Cub Cadet I-Beam Style - Manual (Page 84)

3-65
3
a.Fix: Perform the Clutch Cable Adjustment sec-
tions.
5. Is the V-belt worn or stretched? See Figure 3-
180.
a. Fix: Perform the Belt Replacement section.
6.Is the V-belt routed correctly?
a. Fix: Remove the belt cover and verify that the
V-belt is routed correctly.
7.Does the engine pulley rotate the crankshaft of
the engine?
a. Fix: Remove the engine pulley halves and
replace.
8.Is the input pulley secured to the input shaft?
See Figure 3-181.
a.Fix: Secure the input pulley using a hex bolt,
lock washer, and flat washer.
9.Does the input pulley rotate the input shaft?
See Figure 3-182.
a.Fix: Remove the input pulley and inspect the
engagement splines. If worn, replace the input
pulley.
10.When the indicator bracket is locked into a
wheel drive position, and the input pulley is
rotated, does the wheel shaft assembly rotate?
See Figure 3-183.
Tillers.fm Page 65 Tuesday, February 19, 2002 1:28 PM