Cub Cadet I-Beam Style - Manual (Page 275)

6-76
21. Inspect all components for damage or wear.
See Figure 6-135.
22. Inspect the kickoff valve spool for damage or
wear. See Figure 6-136.
NOTE
Make certain the small internal bypass port is
clear of any obstructions.
23. Assemble in reverse order above.
Removing the Pressure Relief Valve
CAUTION
Removing and installing the pressure relief
valve will change the hydraulic systems oper-
ating pressure. The Pressure Relief Valve
Adjustment section must be performed to reset
the operating pressure to specification.
1. Remove the hex cap plug from the top of the
control valve body using a 5/8" wrench. See
Figure 6-137.
2. Inspect the “O” ring on the hex cap plug to
make certain it is not damaged. See Figure 6-
138.
3. Mark the adjustment set screw location using a
sharp object.
4. Count the number of rotations the adjustment
set screw rotates while removing it using a flat-
blade screw driver. See Figure 6-139.
Figure 6-135.
Figure 6-136.
Figure 6-137.
Figure 6-138.
Log Splitters 2.fm Page 76 Wednesday, February 20, 2002 1:35 PM