Cub Cadet I-Beam Style - Manual (Page 181)

5-42
5-8.5 Blade impellers, in 1991 and prior years, were
a 4-blade style. In 1992 they were changed to
a 3-blade style. See Figure 5-72.
5-8.6 Augers were also changed in 1992. They are
now notched to break up ice and packed snow.
See Figure 5-73.
5-8.7 Replacing Friction Wheel Rubber. The rub-
ber on the friction wheel is subject to wear and
should be checked after 25 hours of operation,
and periodically thereafter. Replace the friction
wheel rubber if any signs of wear or cracking
are found.
WARNING
Drain gasoline from snow thrower or place a
piece of plastic under gas cap.
1. Tip snow thrower up and forward so that it
rests on the housing.
SNOW THROWER.fm Page 42 Wednesday, February 20, 2002 10:28 AM