Cub Cadet I-Beam Style - Manual (Page 170)

5-31
5
5. Loosen (do not remove) bottom bolts which
attach auger housing to frame assembly.
6. Remove two engine pulley belt guards and
shoulder bolts. Disconnect fan belt from engine
pulley. See Figure 5-48.
7. Separate auger housing from frame assembly.
8. Unhook idler spring. See Figure 5-49.
9. Remove belt from auger pulleys as follows:
a. Model 345: Remove center bolts from both
idler pulleys. Slide auger pulleys out
enough to slide belt off.
b. Models 355 and 385: Place a block of
wood between housing and augers to
keep auger pulleys from turning. Remove
pulleys by turning center hub. See Figure
5-50.
SNOW THROWER.fm Page 31 Wednesday, February 20, 2002 10:28 AM