Cub Cadet I-Beam Style - Manual (Page 254)

6-55
6
10. Quickly reconnect the suction hose and secure
it in place using a 5/16" socket._____
11. Check the fluid level and replace the lost
fluid._____
12. Start the engine and verify that the engine is
operating between 3500 and 3600 RPM using
a tachometer._____ See Figure 6-67.
NOTE
See the engine service manual for correct
RPM specifications and procedures.
13. Shut the engine off.
Pump Troubleshooting
1. Latch the log splitter in the horizontal posi-
tion._____ See Figure 6-68.
2. With the log splitter off, cycle the control valve
forward and rearward several times to relieve
any pressure in the hydraulic system._____
See Figure 6-69.
3. Remove the high pressure hydraulic hose from
the inlet port of the control valve using channel
locks and a (1 and 1/8") wrench._____
NOTE
Make certain that any dirt or debris is removed
from the hydraulic connections before they are
loosened.
Figure 6-66.
Figure 6-67.
Figure 6-68.
Figure 6-69.
Log Splitters 2.fm Page 55 Wednesday, February 20, 2002 1:35 PM