CANOGA PERKINS CanogaOS Configuration Guide User Manual

Page 68

CanogaOS Configuration Guide

Proprietary & Confidential Canoga Perkins Metro Ethernet Switches

Page 68 of 350

DUT(config) # erps 1

Create erps domain with id 1.

DUT(config) # erps 1 sub control vlan 12

Set vlan 12 as the sub control vlan of erps domain 1.

DUT(config) # erps 1 ring 2 level sub

Create an erps sub ring 2 for domain 1.

DUT(config) # erps 1 ring 2 mode master

Set node as master of ring 2 for domain 1.

DUT(config) # erps 1 ring 2 primary interface eth-0-9

Set primary interface of ring 2 for domain 1.

DUT(config)# erps 1 ring 2 secondary interface eth-0-13 Set secondary interface of ring 2 for domain 1.

DUT(config) # erps 1 ring 2 enable

Enable ring 2 for domain 1.

DUT(config) # erps 1 enable

Enable domain 1.

Validation Command

Switch 1

DUT #show erps 1

ERPS domain ID: 1

ERPS domain name: ERPS001

ERPS domain primary control VLAN ID: 11

ERPS domain sub control VLAN ID: 12

ERPS domain hello timer interval: 1 second(s)

ERPS domain fail timer interval: 3 second(s)

ERPS ring ID: 1

ERPS ring level: primary

ERPS ring 1 node mode: master

ERPS ring 1 node state: complete

ERPS ring 1 primary interface name: eth-0-9

ERPS ring 1 secondary interface name: eth-0-13

Switch 2