CANOGA PERKINS CanogaOS Configuration Guide - Manual (Page 319)

CanogaOS Configuration Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 319 of 350
DUT1(config )#
Step 5: enter line configuration mode
DUT1(config)#line vty 0 7
DUT1(config-line)#
Step 6: configuration line authentication.
DUT1(config-line)#login authentication radius-login
DUT1(config-line)#
Notes:
Make sure Linux Box and Canoga Switch can ping each other.
Pay attention to login authentication queue. In this sample, if RADIUS returns an error, the user
is authenticated using the local database.
For more information about the configuration of RADIUS authentication, please reference other
CanogaOS manuals.
Checking Configuration
Step 1: make sure all cables of the network are linked well.
Step 2: make sure Linux Box and Canoga Switch can ping each other.
Step 3: make sure the RADIUS authentication function being enabled. You can use command
show authentication status in CanogaOS.
DUT1#show aaa status
aaa stats:
Authentication enable
DUT1#
Step 4: you can use command show rsa keys in SSH server.
DUT1#show aaa method-lists authentication