CANOGA PERKINS CanogaOS Configuration Guide - Manual (Page 49)

CanogaOS Configuration Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 49 of 350
DUT# configure terminal Enter the Configure mode.
DUT(config)# spanning-tree mode mstp Configure a spanning-tree mode.
DUT(config)# vlan database Enter vlan configuration mode.
DUT(config-vlan)# vlan 10 Create vlan 10 on bridge.
DUT(config-vlan)# vlan 20 Create vlan 20 on bridge.
DUT(config-vlan)# exit Exit vlan configuration mode.
DUT(config)# spanning-tree mst configuration Enter the Multiple Spanning Tree configuration mode.
DUT(config-mst)# region Canoga Configure region name Canoga.
DUT(config-mst)# instance 1 vlan 10 Create an instance of vlan.
DUT(config-mst)# instance 2 vlan 20 Create an instance of vlan.
DUT(config-mst)# exit Exit the Multiple Spanning Tree configuration mode.
DUT(config)# interface eth-0-9 Enter interface mode of interface eth-0-9
DUT(config-if)# switchport mode trunk Configure eth-0-9 to mode trunk.
DUT(config-if)# switchport trunk allowed vlan all Configure vlans that allowed passing the port.
DUT(config-if)# no shutdown Open the port.
DUT(config-if)# exit Exit interface mode of interface eth-0-9
DUT(config)# interface eth-0-10 Enter interface mode of interface eth-0-10
DUT(config-if)# switchport mode trunk Configure eth-0-10 to mode trunk.
DUT(config-if)# switchport trunk allowed vlan all Configure vlans that allowed passing the port.
DUT(config-if)# no shutdown Open the port.
DUT(config-if)# exit Exit interface mode of interface eth-0-10
DUT(config)# interface eth-0-17 Enter interface mode of interface eth-0-17
DUT(config-if)# switchport mode trunk Configure eth-0-17 to mode trunk.
DUT(config-if)# switchport trunk allowed vlan all Configure vlans that allowed passing the port.
DUT(config-if)# no shutdown Open the port.
DUT(config-if)# exit Exit interface mode of interface eth-0-17
DUT(config)# interface eth-0-18 Enter interface mode of interface eth-0-18