CANOGA PERKINS CanogaOS Configuration Guide - Manual (Page 279)

CanogaOS Configuration Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 279 of 350
DUT(config)# qos map cos-pri-color cos 1 to 63 green
IP-Precedence-Priority-Color Map
The following shows modifying an IP-Precedence-Priority-Color map. This map is used to
generate an internal priority color value from IP-Precedence during classification; this value
determines the QoS action in the DUT, such as selecting one of the eight egress queues, etc.
1. configure terminal.
2. qos map ip-prec-pri-color ip-prec <0-7> to PRIORITY COLOR to modify the
CoS-Priority-Color Map.
PRIORITY = priority value, range is 0-63.
COLOR = color values, red, yellow or green
The following example shows mapping ip-prec 1 to priority 63 color green, and trust CoS in the
interface eth-0-1 ingress for classification.
DUT# configure terminal
DUT(config)# qos map ip-prec-pri-color ip-prec 1 to 63 green
DUT(config)# interface eth-0-1
DUT(config-if)# trust cos
EXP-Priority-Color Map
The following shows modifying an EXP-Priority-Color map. This map is used to generate an
internal priority color value from MPLS EXP during classification; this value determines the
QoS action in the DUT, such as selecting one of the eight egress queues, etc.
1. configure terminal.
2. qos map exp-pri-color exp <0-7> to PRIORITY COLOR to modify the
EXP-Priority-Color Map.
PRIORITY = priority value, range is 0-63.
COLOR = color values, red, yellow or green
The following example shows mapping EXP 1 to priority 63 color green, and MPLS packets
with EXP 1 have the highest priority.
DUT# configure terminal
DUT(config)# qos map exp-pri-color exp 1 to 63 green
DSCP-Priority-Color Map
The following shows modifying a DSCP-Priority-Color map. This map is used to generate an
internal priority color value from DSCP during classification; this value determines the QoS
action in the DUT, such as selecting one of the eight egress queues, etc.
1. configure terminal.
2. qos map dscp-pri-color DSCP to PRIORITY COLOR to modify the DSCP-Priority-Color
Map.
DSCP = DSCP value, range is 0-63.