CANOGA PERKINS CanogaOS Configuration Guide - Manual (Page 301)

CanogaOS Configuration Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 301 of 350
DUT(config)#dhcp snooping Enable dhcp snooping feature.
35.2.3 Validation Commands
1. Check the interface configuration
DUT(config)#show running-config interface eth-0-12
!
interface eth-0-12
dhcp snooping trust
switchport access vlan 2
switchport access allowed vlan add 2
!
DUT(config)#show running-config interface eth-0-1
!
interface eth-0-1
switchport access vlan 2
switchport access allowed vlan add 2
!
2. Check the dhcp service status
DUT#show services
Networking services configuration:
Service Name Status
============================================================
dhcp enable
3. Print dhcp snooping configuration to check current configuration
DUT#show dhcp snooping config
dhcp snooping service: enabled
dhcp snooping switch: enabled
Verification of hwaddr field: enabled
Insertion of relay agent information (option 82): enabled
Relay agent information (option 82) on untrusted port: not allowed
dhcp snooping vlan 2
4. Show dhcp relay statistics to check the dhcp snooping statistics
DUT#show dhcp snooping statistics
DHCP snooping statistics: