CANOGA PERKINS CanogaOS Configuration Guide - Manual (Page 262)

CanogaOS Configuration Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 262 of 350
DUT1(config-router)# bgp
router-id 11.11.11.11
Configure the router identifier.
DUT1(config-router)# neighbor
10.10.10.10 remote-as 1 Configure an internal or external
BGP (iBGP or eBGP) TCP session
with another router.
DUT1(config-router)# neighbor
10.10.10.10
update-source
loopback0
Allow internal BGP sessions to use
any operational interface for TCP
connections.
DUT1(config-router)#
address-family ipv4 Enter the IPv4 address-family
command mode.
DUT1(config-router-af)#
neighbor 10.10.10.10 activate Enable the exchange of the
specified AF routes with a
neighboring router.
DUT1(config-router-af)#
neighbor
10.10.10.10
send-community both
Specify that a community attribute
should be sent to a BGP neighbor.
DUT1(config-router-af)#
redistribute connected Redistribute connected routes in the
VRF.
DUT1(config-router-af)#
redistribute static Redistribute static routes in the
VRF.
DUT1(config-router-af)#
exit-address-family Exit the address family mode.
DUT1(config-router)#
address-family vpnv4 unicast Enter the vpnv4 address-family
command mode.
DUT1(config-router-af)#
neighbor 10.10.10.10 activate Enable the exchange of the
specified AF routes with a
neighboring router.
DUT1(config-router-af)#
neighbor
10.10.10.10
send-community both
Specify that a community attribute
should be sent to a BGP neighbor.
DUT1(config-router-af)#
exit-address-family Exit the address family mode.
DUT1(config-router)#
address-family ipv4 vrf vpn2 Enter the IPv4 address-family
command mode.
DUT1(config-router-af)#
redistribute connected Redistribute connected routes in the
VRF.