CANOGA PERKINS CanogaOS Configuration Guide - Manual (Page 341)

CanogaOS Configuration Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 341 of 350
DUT(config)#monitor session 1 source
interface eth-0-4 both Specify the mirror session and the source port (monitored port).
DUT(config)#monitor session 1 source
vlan 10 rx Specify the mirror session and the source VLAN.
This example shows how to set up a mirror session, session 1, for monitoring source port traffic
to a destination port. You can use show monitor session to see the configuration.
DUT#show monitor session 1
Session 1
----------
Status : Valid
Source Ports :
Receive Only :
Transmit Only :
Both : eth-0-4
Source VLANs :
Receive Only : 10
Transmit Only :
Both :
Destination Port : eth-0-8