CANOGA PERKINS CanogaOS Configuration Guide - Manual (Page 165)

CanogaOS Configuration Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 165 of 350
or Overthreshold, track object state is
up; otherwise track object state is
down.
DUT(config-track)# delay up
30 (Optional)Configure the track object
parameters:
specify a period of time (in seconds)
to delay when object state is turned
from down to up.
DUT(config-track)# delay
down 30 (Optional)Configure the track object
parameters:
specify a period of time (in seconds)
to delay when object state is turned
from up to down.
DUT(config-track)#exit Exit the track mode.
DUT(config)#exit Exit the Configure mode.
Validation Commands
To display the track rtr reachability configuration, use the show track privileged
EXEC command.
DUT#show track
Track 1
Type : Response Time Reporter(RTR) Reachability
RTR entry number : 1
State : up
Delay up : 30 seconds
Delay down : 30 seconds
21.2.4 Configuring the track rtr state
Beginning in privileged EXEC mode, follow these steps to configure the track rtr
state:
Command Description
DUT#configure terminal Enter the Configure mode.
DUT(config)# track 1 rtr 1
state Create a track object and track the
state of an ip sla entry.
When the state of ip sla entry is OK ,
track object state is up; otherwise
track object state is down.
DUT(config-track)# delay up
30 (Optional)Configure the track object
parameters:
specify a period of time (in seconds)