CANOGA PERKINS CanogaOS Configuration Guide - Manual (Page 298)

CanogaOS Configuration Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 298 of 350
Enable DHCP Relay global service
DUT(config)#service dhcp enable Enable dhcp services.
DUT(config)#dhcp relay Enable dhcp relay feature.
35.1.5 Validation Commands
1. Check the interface configuration
DUT# show running-config interface eth-0-12
!
interface eth-0-12
no switchport
ip address 4.4.4.2/24
!
DUT# show running-config interface eth-0-1
!
interface eth-0-1
no switchport
dhcp relay information trusted
dhcp-server 1
ip address 5.5.5.2/24
!
2. Check the dhcp service status
DUT#show services
Networking services configuration:
Service Name Status
============================================================
dhcp enable
3. Check the dhcp server group configuration
DUT#show dhcp-server
DHCP server group information:
============================================================
group 1 ip address list:
[1] 4.4.4.1
4. Show dhcp relay statistics to check the dhcp relay statistics
DUT#show dhcp relay statistics