Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 99)

Alarm messages Priority
Purging filter line. Very low
Calibration is overdue. CO2 might not be accurate. Very low
Factory service is overdue. CO2 might not be accurate. Very low
CO2 auto-zero in progress. Very low
Respiratory freshness timeout expired. Very low
Replace RRa sensor. Very low
RRa background interference detected. Very low
RRa patient interference detected. Very low
File system formatted on first-time startup. Very low
Lost connectivity with host. Low
Technical alarms
Alarm messages Priority
Low battery 5 minutes or less remaining. High
Searching for SpO2 signal. High
Communications module did not power on properly. Power down the device. High
Check for occlusion in gas line. High
Network not found; check network cable connection. Very low
Battery is absent or faulty. Very low
Battery is absent or faulty. Call for service. Very low
NIBP air leak; check cuff and tubing connections. Very low
NIBP not functional. Call for service. Very low
Unable to determine NIBP; check connections and tubing for kinks. Very low
Incorrect NIBP cuff size; check patient type. Very low
Inflation too quick; check NIBP cuff and tubing connections. Very low
Unable to determine NIBP; check connections; limit patient movement. Very low
Unable to determine NIBP; check inflation settings. Very low
Directions for use Alarms 93