Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 174)

Parameters
Specify advanced IPI settings
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code.
d. Touch OK.
The General tab will appear.
2. Touch the Parameters tab.
3. Touch the IPI tab.
4. Specify settings.
Setting Action/Description
Display IPI Select to display the IPI frame on the Home tab.
Default view Select a numeric view or trend graph view as the primary
IPI display on the Home tab.
Trend period default Select a default time period for the trend graph display
of IPI.
5. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit.
Specify advanced RRa settings
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code.
d. Touch OK.
The General tab appears.
2. Touch the Parameters tab.
3. Touch the RRa tab.
4. Specify settings.
Setting Action/Description
RRa averaging Select the default averaging option that provides the
desired visibility of subtle variations in RRa
measurements.
Freshness timeout Select the period of time the device should wait before
alarming while it attempts to obtain a valid RRa reading.
5. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit.
168 Advanced settings Welch Allyn Connex ® Vital Signs Monitor 6000 Series™