Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 82)

a. Touch the Settings tab.
The Monitor tab appears.
b. Touch End monitoring.
An "End monitoring" dialog appears with the following options:
• New patient – Clears patient and location context and review data after you
remove patient sensors
• Power down – Clears patient and location context and review data, and
powers down the device
• Cancel – Retains patient data and returns to Home tab
c. Touch New patient.
d. Complete step 1.
Note If patient context has been established and you attempt to
select a new patient by navigating to the List tab, the device
displays the message, "Patient already assigned to device.
To assign a different patient, end monitoring for the current
patient."
Manage patient records (Continuous Monitoring profile)
In the Continuous Monitoring profile, the Review tab enables access to a trend table of
all readings for the currently selected patient. You can configure the time intervals
displayed, and you can scroll through the last 24 hours of patient measurements. Trend
data can be printed from this tab.
1. Touch the Review tab.
Note Measurements that triggered a physiological alarm are
highlighted on this tab.
If your device is configured to monitor patient movement, the Review tab might
resemble the following example.
76 Patient data management Welch Allyn Connex ® Vital Signs Monitor 6000 Series™