Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 172)

event, which will result in a "No breath detected"
physiological alarm.
4. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit.
Specify advanced display settings
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code.
d. Touch OK.
The General tab appears.
2. Touch the Display tab.
3. Specify settings.
Setting Action/Description
Display lock Specify the required period of clinician inactivity before
the touchscreen locks.
Display power saver Specify the required period of monitor inactivity before
the display turns off.
Clinician interactions, new vital sign measurements, or
alarm conditions automatically turn on the display.
Device power down Specify the required period of monitor inactivity before
the monitor turns off.
4. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit.
Specify advanced device settings
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code.
d. Touch OK.
The General tab appears.
2. Touch the Device tab.
3. Specify settings.
Option Description
Location ID Touch and enter up to 20 alphanumeric
characters.
Enable Save as default Select to enable display of the Save as default control.
166 Advanced settings Welch Allyn Connex ® Vital Signs Monitor 6000 Series™