Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 101)

Alarm messages Priority
Low battery 30 minutes or less remaining. Very low
Low SpHb signal quality. Check sensor. Very low
Low SpO2 signal quality. Check sensor. Very low
Low perfusion. Check sensor. Very low
Replace the SpO2 cable. Very low
SpO2 mode only. Check sensor or cable. Very low
SpO2 sensor expires in…. Very low
Unexpected restart occurred. Call for service. Very low
Weight scale not functional. Call for service. Very low
CO2 not functional. Call for service. Very low
Filter line disconnected. Very low
CO2 module temperature is out of range. CO2 might not be accurate. Very low
Purging filter line. Very low
Calibration is overdue. CO2 might not be accurate. Very low
Factory service is overdue. CO2 might not be accurate. Very low
CO2 auto-zero in progress. Very low
Respiratory freshness timeout expired. Very low
Replace RRa sensor. Very low
RRa background interference detected. Very low
RRa patient interference detected. Very low
File system formatted on first-time startup. Very low
Lost connectivity with host. Low
The patient has exited bed. High
Patient turn overdue. Very low
EarlySense not functional. Very low
The sensor has expired. Very low
The sensor is defective. Very low
Directions for use Alarms 95