Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 44)

• On the Home tab, touch the Clinician ID section of the Device Status area (top
left corner of the screen).
• Touch the Settings > Clinician tab.
2. To enter the clinician name, touch , located at the right of the text field, and
enter characters.
You can enter up to 32 characters for the clinician's first and last name. Enter only 1
character for the middle initial.
3. To enter the clinician ID, use one of these methods:
• Touch and enter the ID.
• Scan the clinician's barcode with a barcode scanner.
Note If "Require clinician ID match to save measurements" is
enabled in Advanced settings, a progress indicator appears in
the Device Status area as the device queries an external host
system for a matching ID.
•
An unsuccessful query results in the message, "Unable to identify
clinician."
• A successful query results in clinician data replacing the progress
indicator according to preferences configured in Advanced settings.
4. If prompted, enter your system password in the Authentication pane.
5. Touch OK to save your entries and return to the Home tab.
Set the default configuration
1. Enter or adjust the settings you want to add or change on the device.
Note The new settings appear as they are completed but are
temporary until they are saved.
2. Touch the Settings tab.
3. Touch the Device tab.
4. Touch the Defaults vertical tab.
5. Touch Save as default.
6. Touch OK to confirm that you want to overwrite your previous settings and replace
them with your current settings in the default startup configuration. Or touch Cancel
to retain the previous settings.
The new settings are stored as the default startup settings once you restart the monitor.
Note To enable or disable this control, navigate to the Device tab in Advanced
settings and select or deselect Enable save as default. (This requires the
Advanced settings access code.)
Note If the device is connected to Connex CS, the date and time settings are
synchronized with the Connex CS settings.
Note The date and time stamps on saved patient measurements will adjust in
response to new date and time settings.
38 Startup Welch Allyn Connex ® Vital Signs Monitor 6000 Series™