Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 39)

Startup
Power
The device operates in one of two power states:
•
Device powered on. The device is operating on battery power or AC power. You can
utilize the device's features, and the display is active.
• Sleep (Display power-saving) mode. The device is operating on battery or AC power,
but the display is off to conserve power. Settings for this mode can be changed in
the Display tab in Advanced settings.
Note Battery-powered accessories connected to the device
continue to charge while the device is in this mode and
connected to AC power.
The following actions will return the display to the active state:
•
Touch the screen
• Remove the temperature probe from the probe well
• Attach the SpO2 sensor to a patient
• Attach a sampling line to a patient
•
Press
The following actions will return the display to the active state:
•
Touch the screen
• Remove the temperature probe from the probe well
• Attach the SpO2 sensor to a patient
• Connect the patient movement cable and bed sensor (sensing unit) to the device
• Attach a sampling line to a patient
•
Press
33