Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 137)

1. Properly size the blood pressure cuff and position it around the patient’s bare upper
arm.
2. On the Home tab, touch .
3. Select Stat.
4. Touch Start intervals.
The Home tab appears with the intervals timer counting down from 0:05:00.
Stop intervals measurements
Follow these steps to turn off intervals.
1. On the Home tab, touch the interval timer button ( ).
Note The actual time remaining varies based on the length of the
selected interval and the time expired.
2. Touch Stop intervals.
Note If you are in Stat intervals, you can also stop intervals on the Home tab by
touching .
Temperature
Temperature frame
From the temperature frame you can measure patient temperature.
The temperature frame contains data and features relevant to temperature
measurement. The frame provides different features based on the profile you are using.
Temperature frame in Continuous Monitoring profile
The size of the Temperature frame and displayed measurements varies based on your
configuration.
The Continuous Monitoring profile also provides a visual indication of aging episodic
measurements (those more than 16 minutes old) and a timestamp indicating the time of
the measurement. When a temperature measurement is displayed for more than 16
minutes, the numerics on the screen change from their current color to gray. After one
hour, these measurements are cleared from the frame.
Directions for use Patient monitoring 131