Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 100)

Alarm messages Priority
SpO2 not functional. Call for service. Very low
Attach SpO2 sensor to monitor. Very low
Replace the SpO2 sensor. Very low
Set date and time. Very low
Maximum number of patient records saved. Oldest record overwritten. Very low
Connect temperature probe. Very low
Insert correct color-coded probe well. Very low
Replace temperature probe. Very low
Temperature not functional. Call for service. Very low
Retry temperature measurement. Very low
Temperature time limit exceeded. Retry temperature measurement. Very low
Low battery, unable to print; plug into outlet. Very low
Printer door is open; close to continue. Very low
Printer not functional. Call for service. Very low
Out of paper. Very low
Printer too hot; wait to retry. Very low
Radio not functional. Call for service. Very low
Radio error. Power down and restart. Very low
Radio error. The radio has restarted. Very low
Unable to establish network communications. Radio out of network range. Very low
Unable to establish network communications. Call for service. Very low
Radio software upgrade failed. Very low
Unable to load configuration; using factory defaults. Very low
Functional error. Call for service. Very low
External device not recognized. Very low
Incompatible Welch Allyn device. Very low
USB Communication failure. Call for service. Very low
94 Alarms Welch Allyn Connex ® Vital Signs Monitor 6000 Series™