Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 74)

• Active versus target profile
• Established patient context
• Saved patient measurement data
• Sensors actively collecting patient measurement data
The following table provides an overview of allowed profile changes based on these
conditions.
Conditions under which specific profile changes are allowed
Active profile Target profile Established patient
context
Saved patient
measurement data
Sensors actively
collecting patient
measurement data
Continuous
Monitoring
Intervals Monitoring
or Spot Check
X
Continuous
Monitoring
Triage X
Intervals Monitoring
or Spot Check
Continuous
Monitoring
X X X
Spot Check Intervals Monitoring X X X
Intervals Monitoring Spot Check X X X
Triage Continuous
Monitoring
N/A X X
Triage Intervals Monitoring
or Spot Check
N/A X X
Intervals Monitoring
or Spot Check
Triage X X X
Note Confirmation dialogs appear onscreen whenever a specific profile change
would erase saved Review tab data, erase episodic patient measurements
on the display, or potentially require changes to patient or location context.
Change from one non-continuous profile to another non-continuous
profile
1. Touch the selected profile indicator in the Device Status area.
The Profile vertical tab appears.
2. Select the desired profile.
The profile change immediately takes effect.
68 Profiles Welch Allyn Connex ® Vital Signs Monitor 6000 Series™