Banner SC22-3E Safety Controller with Ethernet - Manual (Page 25)

ISO 13849-1 (2006): Category 4 Performance Level (PL) e, complies with Machinery Directive 2006/42/EC
IEC 61131-2 Programmable Controllers, Part 2: Equipment Requirements and Tests
UL 508 Industrial Control Equipment
UL 1998 Software in Programmable Components
ANSI NFPA 79 Electrical Standards for Industrial Machinery
IEC 60204-1 Electrical Equipment of Machines: General Requirements
ISO 13851 (EN574) Safety of Machinery – Two-Hand Control Devices – Functional Aspects and Design Principles
ISO 13850 (EN418) Emergency Stop Devices
Also see front section of this manual for a list of other applicable U.S. and international standards.
Agency Approvals
3.5.1 Dimensions
64 mm
(2.5")
131 mm
(5.2") 112 mm
(4.4")
130 mm
(5.1")
35 mm
(1.4")
Allow minimum 65 mm (2.6") clearance
for USB cable or Ethernet cable and
43 mm (1.7") for XM Card insertion
Figure 9. SC22-3 and SC22-3E dimensions
SC22-3/-3E Safety Controller Instruction Manual
P/N 133487 rev. C www.bannerengineering.com - tel: 763-544-3164 25