Banner MSA Series Protective Mounting Stands - Manual

MSA Series Protective Mounting Bracket
For MINI-SCREEN ® Light Screen Sensors
Printed in USA
12/03
P/N 64715 rev. A
WARNING . . .
Maintain Required Separation Distance
The Defined Area (light screen) produced by MINI-SCREEN ® sensors
must be placed at a minimum safe distance from the dangerous motion
of the machine being guarded. This necessary minimum distance is called
the separation distance, and is discussed in the appropriate instruction manual. Failure
to calculate this distance correctly and to maintain minimum separation distance can
result in serious injury or death.
!
Features
• Available in three sizes to fit sensors up to 48" long
• Easy to mount to wall, post, or machine frame
• Protects one side and front window of light screen sensor, or combine two in a
U-shaped configuration to protect entire sensor (see Figure 2)
• For use with MINI-SCREEN ® or MINI-ARRAY ™ emitters and receivers
Models
Description
Banner MSA Series Protective Mounting Brackets are for use with light screen
emitters and receivers. They are designed to deflect physical impact and flying
material, such as weld spatter, preventing damage to the sensor or its lens.
Specifications
Model Number Length
“L”
For MINI-SCREEN or MINI-ARRAY Sensors*
MSA-PMS-30 30 " 12 " , 16 " , 20 " , or 24 "
MSA-PMS-42 42 " 28 " , 32 " , or 36 "
MSA-PMS-54 54 " 40 " , 44 " , or 48 "
Construction 11 ga. AWG cold-rolled steel
Finish Yellow polyester paint
Weight 30 " : 6 lb.
42 " : 9 lb.
54 " : 11 lb.