Banner ES-FA-6G Safety Module User Manual
Es-fa-6g 1-channel emergency stop safety module, E-stop safety module features
ES-FA-6G 1-Channel Emergency Stop Safety Module
®
24V ac/dc operation
Printed in USA
P/N 55581B9A
E-Stop Safety Module Features
•
Monitors one single-channel normally closed Emergency Stop switch circuit for
a contact failure or wiring fault
•
Three output switching channels for connection to control-reliable power
interrupt circuits
•
Auto reset or manual reset
•
One auxiliary non-safety N/C output contact for status monitoring by process
controller
•
Design complies with standards UL991, EN418, and EN954-1
(Safety Category 2)
•
For use in functional stop category 0 applications per NFPA 79
and EN418
•
6 amp safety output contacts
WARNING . . .
This Emergency Stop Safety Module is not a point-of-operation guarding device, as
defined by OSHA regulations. It is necessary to install point-of-operation guarding devices, such as safety
light curtains and/or hard guards, to protect personnel from hazardous machinery. Failure to install point-of-
operation guards on hazardous machinery can result in a dangerous condition which could lead to serious
injury or death.
!
p/n 55581 Rev. B
Jan 2013