Banner SI-HG63 Hinge Style Switches User Manual
Hinge wing safety interlock switches, Models
Datasheet
SI-HG(Z)63 Series Safety Interlock Switches attached with a load-bearing hinge
• Safety switch is integrated into a highly robust PBT housing and screwed onto the fine-cast stain-
less steel or zinc die-cast hinge
• Safety switching point is repositionable
• Right-hinge QD, left-hinge QD, and right-angle QD hinge models available; switches can also be
converted to operate from the opposite side
• A non-switching blank hinge is also available. See
on page 13.
• Switch components are protected from mechanical impact for superior performance to actuator-
activated safety switches; rated IEC IP67
• Hinge operates to a full 270° range of motion; safety switching point (guard-closed position) is
adjustable over the full 0 to 270°operating range
• Stainless steel hinge supports a load of 1800 N (180 Kg ). Zinc die-cast hinge supports a load of
1200 N (120 Kg)
• When properly interfaced or used with an appropriate controller, two SI-HG(Z)63 switches on an
individual gate or guard can achieve safety category 4, per ISO 13849-1 (EN 954-1)
• Typical applications include hinged covers and guards on machines and hinged gates in safety
fencing systems
Models
Model
Construction
Housing Style/QD Connection
SI-HG63FQDR
Stainless Steel
Inline QD—With QD facing down, switch is mounted on right side of hinge
SI-HGZ63FQDR
Zinc Die-cast
SI-HG63FQDL
Stainless Steel
Inline QD—With QD facing down, switch is mounted on left side of hinge
SI-HGZ63FQDL
Zinc Die-cast
SI-HG63FQDRR
Stainless Steel
Right-Angle QD—With switch body down, switch is mounted on right side of hinge
SI-HGZ63FQDRR
Zinc Die-cast
33
21
11
rd/bu
gn
rd
34
22
12
rd/bk
rd/ye
rd/wh
Figure 1. Contact Configuration
1
(Gate Closed State)
rd/bu
rd
rd/bk
rd/ye
rd/wh
33
21
11
gn
34
22
12
Figure 2. Contact Configuration
1
(Gate Open State)
3°
3°
6°
6°
9°
9°
1.5 Nm
Set Point
1.5 Nm
11-12
21-22
33-34
Safety
Safety
Non-Safety
Contacts:
Open
Closed
Transition
Figure 3. Switching Diagram
1
Terminals 33 and 34 are non-safety.
Hinge Wing Safety Interlock Switches
Datasheet
129465_web Rev.
D
3/4/2014