Banner EZ-ARRAY Lens Shields - Manual

EZSS Series Snap-On Lens Shields ®
For use with EZ-SCREEN ® Type 4 Emitters and Receivers
Printed in USA 02/12 P/N 127944 rev. B
Features
• Provides impact protection for EZ-SCREEN 14 mm and 30 mm resolution emitters
and receivers
• Clear PETG co-polyester lens shields snap into place; need no foam gasket for
attachment
• Can be removed and reinstalled easily
• Foam gasket (neoprene sponge) included to prevent debris from falling between lens
shield and sensor window
• Reduces sensing range by approximately 10% per shield (20% per pair)
Models
Lens Shield
Model
Fits Emitter/Receiver
Models
Lens Shield Overall
Length
EZSS-150 SLS..-150.. 236 mm
EZSS-300 SLS..-300.. 346 mm
EZSS-450 SLS..-550.. 496 mm
EZSS-600 SLS..-600.. 645 mm
EZSS-750 SLS..-750.. 795 mm
EZSS-900 SLS..-900.. 945 mm
EZSS-1050 SLS..-1050.. 1094 mm
EZSS-1200 SLS..-1200.. 1244 mm
EZSS-1350 SLS..-1350.. 1394 mm
EZSS-1500 SLS..-1500.. 1543 mm
EZSS-1650 SLS..-1650.. 1693 mm
EZSS-1800 SLS..-1800.. 1843 mm
37.0 mm
(1.46")
1.6 mm
(0.06")
20 mm
(0.79")
Figure 1. Lens shield dimensions – cross-section