Banner EZ-SCREEN­ Safety Light Curtain Systems - Manual

EZ-SCREEN ® AC Interface Box
EZAC Series for use with Type 4 Emitters and Receivers
Printed in USA 02/08 P/N 120321 rev. C
Features
AC power supply for use with EZ-SCREEN Safety Light Screen sensors. Models
EZAC-R.. can be interfaced with up to three receivers or two cascaded emitter/
receiver pairs; models EZAC-E.. can power up to four emitters
Supplies +24V dc power @ 0.7 amps (16.8 W max. power)
Accepts input voltages from 100-250V ac (50-60 Hz)
Models available with external device monitoring (EDM) – see Models table Key
reset switch on EZAC-R.. models (Receiver/Pair models)
Replaceable relay module with 8 Amp / 250V ac/dc safety output contacts
(models EZAC-R.. only)
IP65 metal housing
Can be mounted directly onto sensor housing (hardware included)
Emitter models available for 5-pin (with Test input) or 8-pin (no Test input
available) emitter connections
Easy QD receiver and emitter hookup
Easy QD or hard-wired power and output/EDM connections (depending on model)
•
•
•
•
•
•
•
•
•
•
Emitter/Receiver Boxes
Model Outputs EDM
Emitter/Receiver
Connection
AC Power
Connection
Output and EDM
Connections
EZAC-R9-QE8 3 N.O. Selectable
1- or 2-Channel or
no EDM
8-Pin M12
Euro-style QD
Hard-wired Hard-wired
EZAC-R11-QE8 2 N.O., 1 N.C.
EZAC-R15A-QE8-QS83
1 N.O. + 1 SPDT
(Form C)
1-Channel
3-pin
Mini-style QD
8-pin
Mini-style QD
EZAC-R8N-QE8-QS53 1 N.O., 1 N.C.
Power Monitoring
3-pin
Mini-style QD
5-pin
Mini-style QD
EZAC-R10N-QE8-QS53 2 N.O.
Models
Emitter-only models
Emitter/Receiver models
Emitter-Only Boxes
Model For Emitter Models Emitter Connection AC Power Connection
EZAC-E-QE8 SLSE..-..Q8 (without Test input) 8-Pin M12 Euro-style QD
Hard-wired
EZAC-E-QE5 SLSE..-..Q5 (with Test input) 5-Pin M12 Euro-style QD
EZAC-E-QE8-QS3 SLSE..-..Q8 (without Test input) 8-Pin M12 Euro-style QD 3-Pin Mini-style QD
EZAC-E-QE5-QS5 SLSE..-..Q5 (with Test input) 5-Pin M12 Euro-style QD 5-Pin Mini-style QD