Rockwell Automation 2094-EN02D-M01-S1 Kinetix 6200 and Kinetix 6500 Safe Speed Monitoring Safety Reference Manual - Manual (Page 25)

Rockwell Automation Publication 2094-RM001C-EN-P - May 2013 25
Chapter
3
Installation and Wiring
This chapter provides details on connecting devices and wiring the 2090-K6CK-
D44M Low-profile connector kit.
General Safety Information Observe all electrical safety regulations stipulated by the appropriate technical
authorities.
Refer to the Kinetix 6200 and Kinetix 6500 Modular Multi-axis Servo Drive
User Manual, publication
2094-UM002 , for more information.
Topic Page
General Safety Information 25
Power Supply Requirements 26
Wiring the Safety Connections 26
Terminal Connections 27
Compatible Encoders 28
ATTENTION: The drive is intended to be part of the safety-related control
system of a machine. Before installation, a risk assessment must be performed
to determine whether the specifications of this safety option are suitable for all
foreseeable operational and environmental characteristics for the system being
installed.
ATTENTION: Make sure that the electrical power supplied to the drive is
switched off before making connections.