Rockwell Automation 2094-EN02D-M01-S1 Kinetix 6200 and Kinetix 6500 Safe Speed Monitoring Safety Reference Manual - Manual (Page 12)

12 Rockwell Automation Publication 2094-RM001C-EN-P - May 2013
Preface
Studio 5000 Environment The Studio 5000 Engineering and Design Environment combines engineering
and design elements into a common environment. The first element in the
Studio 5000 environment is the Logix Designer application. The Logix Designer
application is the rebranding of RSLogix 5000 software and will continue to be
the product to program Logix5000™ controllers for discrete, process, batch,
motion, safety, and drive-based solutions.
The Studio 5000 environment is the foundation for the future of Rockwell
Automation® engineering design tools and capabilities. It is the one place for
design engineers to develop all the elements of their control system.
Additional Resources These documents contain additional information concerning related Rockwell
Automation products.
You can view or download publications at
http://www.rockwellautomation.com/literature . To order paper copies of technical
documentation, contact your local Rockwell Automation distributor or sales
representative.
Resource Description
Kinetix 6200 and Kinetix 6500 Modular Multi-axis Servo Drive User Manual,
publication
2094-UM002
Provides information on installing, configuring, starting up, troubleshooting, and applications
for your Kinetix 6200 or Kinetix 6500 servo drive system.
Kinetix Safe-off Feature Safety Reference Manual,
publication
GMC-RM002
Provides information on wiring and troubleshooting your Kinetix 5500 servo drives with the
safe-off feature.
System Design for Control of Electrical Noise Reference Manual,
publication
GMC-RM001 Provides information, examples, and techniques designed to minimize system failures caused
by electrical noise.
EMC Noise Management DVD, publication GMC-SP004
Kinetix Motion Control Selection Guide, publication GMC-SG001
Overview of Kinetix servo drives, motors, actuators, and motion accessories designed to help
make initial decisions for the motion control products best suited for your system
requirements.
Safety Guidelines for the Application, Installation and Maintenance of Solid State
Control, publication
SGI-1.1
Describes important differences between solid state control and hardwired electromechanical
devices.