Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 47)

Rockwell Automation Publication 1752-UM001E-EN-P - June 2014 47
Set Up Your DeviceNet Network Chapter 3
Setting Passwords (optional) You can protect safety devices with a password to prevent changes to the
configuration of the device by unauthorized personnel. When a password is set,
the following operations require the password to be typed.
• Download
• Safety-configuration reset
• Safety-lock
• Safety-unlock
Set or Change a Password
Follow the steps below to set a password for a module.
1. Double-click the module to open the Device Properties dialog box.
2. Select the Safety tab.
3. Click Password.
4. Type the old password, if one exists.
5. Type and confirm the new password.
Passwords may be from 1…40 characters in length and are not case-
sensitive. Letters, numerals, and the following symbols may be used: ‘ ~ !
@ # $ % ^ & * ( ) _ + , - = { } | [ ] \ : ; ? / .
6. Click OK.
TIP You can also access the Set Device Password dialog box by either:
· clicking the module and choosing Set Password from the Device
menu.
· right-clicking the module and choosing Set Password.