Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 154)

154 Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
Chapter 10 Create Your Application Program
8. Add the new function block to your application logic.
Password Protect User-defined Function Blocks
You can set a password to protect user-defined function block files from
unauthorized edits. Verify, report, and print operations are not password-
protected.
To set a password, follow these steps.
1. To open the Function Block Editor, right-click a user-defined function
block and choose Edit.
TIP If you wish to edit your user-defined function block, it cannot be used in the
current application. If it is, the edit option is unavailable.
IMPORTANT Always download programs with user-defined function blocks to the
controller, check their configuration, and verify their operation before using
them in an application.