Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 102)

102 Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
Chapter 7 Configure Your Controller for DeviceNet Communication
In this case, a single 4-byte tag has been created and will use a polled
connection. These 4 bytes are read by the PanelView Plus interface.
Even though you created a DWORD tag, you have access to all 32 bits of
the DWORD within the SmartGuard editor. The sample SmartGuard
code is controlling two of the 32 bits.
The bolded tags in the taglist are used in code.
6. Download the configuration to the SmartGuard 600 controller.