Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual - Manual (Page 166)

166 Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
Chapter 11 Download and Verify
Lock Safety Devices
1. Choose which devices to safety-lock by checking the checkbox in the Lock
column for each device that is ready to be safety-locked.
2. You must check the acknowledgement checkbox before the locking
process can continue.
3. Click Next.
The wizard performs a final comparison of the configuration signature in
each safety device to its configuration signature in RSNetWorx for
DeviceNet software before locking the device.
4. If any of the selected devices are password-protected, you will be prompted
to type the password for that device.
If you want to skip the device and allow the locking process to continue for
other devices, click Skip.
IMPORTANT Before you lock your safety device configurations, you must perform all of the
verification steps required for your application.