Monitor the program online – Rockwell Automation 1752-L24BBBE SmartGuard 600 Controllers User Manual User Manual
Page 151
Rockwell Automation Publication 1752-UM001E-EN-P - June 2014
151
Create Your Application Program
Chapter 10
error occurs, start the Logic Editor and check the program, making any necessary
modifications.
Monitor the Program Online
The I/O tag values and signal states of connections with function blocks can be
monitored online in the Logic Editor. Make sure that RSNetWorx for DeviceNet
software is connected to the network and that the controller being monitored is
in Run mode before starting online program monitoring.
To start online monitoring, click Monitoring
on the toolbar.
During monitoring, the I/O tags or connections that are on are displayed in a
darker color.
To stop online monitoring, click Stop Monitoring on the toolbar.
IMPORTANT
You may need to change the controller’s mode to Execute Mode to monitor
online.