Lenze PLC Designer V2.x - Manual (Page 95)

1.3 EN - 07/2012
L
95
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
9400 HighLine - "LAS_40_INTF_Can_94HL_Speed" sample project
8.3.4.4 Service mode
 Button  selects the service mode.
 Button  starts the motion profile.
 Button  inhibits the motion profile.
 Button selects clockwise rotation (clockwise rotating direction of the motor).
 Display field  indicates the status of the mode.
 Display field  indicates the current speed (variable Speed Value).
 Display field  shows the current speed setpoint.
– Possible setpoint data for the motion profile: 0 ... 100%.
 In area , status information is displayed and errors can be reset.
 Select mode  Stop button  Status of the service mode
 Start button  Activate clockwise
rotation
 Actual speed  Setpoint speed