Lenze PLC Designer V2.x - Manual (Page 36)

PLC Designer V2.x| Lenze Application Samples
Commissioning a sample project
Wiring the hardware
36
L
1.3 EN - 07/2012
7.2.2 Configuring an EL1xx Ethernet interface

How to configure the EL1xxx:
1. Click StartSettingsNetwork and Dial-up Connections for the EL 1xx.
2. Click the Dm9CE1 connection and configure the network interface:
3. Click the button to save the settings.

Note!
Changes carried out are not written into the registry automatically; in the case
of a restart, they are lost.
In order to save changes permanently...
• Click Start Settings Control PanelRegistry on the EL1xxx.
• Click the Save button to save the settings.

Further information can be found in the following documentation:
• EL 1xx - HMI with Windows® CE
• Industrial PC - Parameter setting & configuration