4 requirements, 1 system requirements, 2 what is the plc designer – Lenze PLC Designer V2.x User Manual
Page 23: Requirements, Plc designer v2.x| lenze application samples, 4requirements
1.3 EN - 07/2012
L
23
PLC Designer V2.x| Lenze Application Samples
Requirements
System requirements
4
Requirements
4.1
System requirements
4.2
What is the PLC Designer?
The »PLC Designer« is a Lenze engineering software for programming the PLC of the Lenze
Industrial PC.
Properties
Five different editors for the programming languages standardised in the IEC 61131-3,
and a very powerful CFC editor are provided. They serve to create individual programs,
and to trigger the functions of our L-force Logic & Motion runtime software.
By means of the integrated visualisation the processes are shown, in order to obtain all
important pieces of information at a glance during commissioning.
Engineering PC
IPC (controller)
Hardware
PC/notebook
Industrial PC with PLC (Logic) from
firmware V2.0
Operating system
Windows XP
Windows CE
Lenze software required
»PLC Designer« V2.2.4.x
L-force Logic
Further requirements
• 100 MB of free hard disk memory • CAN bus system
• CAN nodes (depending on the
respective example application)