2N NetStar Admin manual - Manual (Page 95)

95
Figure: View of Listening Port Setting Section
Notification
Client address – here define the client's IP address or domain name to which
notifications are filtered as mentioned below are sent.
Client port – here define the client port to which notifications are sent.
Used local port – here specify the PBX port to be used for sending notifications
if necessary. And for receiving info request confirmations. If this option is
disabled, the port is selected randomly.
Notification type – here select the type of notification to be used. For SNMP v1,
Traps may be selected only, for higher versions info requests are also available.
Trap – is an SNMP message sent to the client about an event that should
be notified. The message does not require acknowledgement.
Inform request – is an SNMP message sent to the client about an event
that should be notified. Unlike traps, inform requests can be resent if
undelivered within the acknowledgement timeout.
Repeat – defines the count of notification sending attempts.
In interval – defines the time interval during which confirmation is
awaited from the client.
Version– here specify the notification coding type according to the SNMP version
used.
SNMP v1
SNMP v2c
SNMP v3