2N NetStar Admin manual - Manual (Page 193)

193
Figure: View of CallBack Configuration Menu for calls
SMS CallBack
Name – only displays the name of the selected object.
CallBack delay [s] – shows the delay between the CallBack requesting SMS
reception and CallBack execution.
Delay in SMS content – the delay data can be omitted in the SMS if set so
here.
Alerting destination – set the destination for routing the numbers included in
the SMS.
SMS format
An incoming SMS for the CallBack function has to be routed into the text router for
routing into the selected CallBack object. The SMS format depends on the Delay in
SMS content setting. If this parameter is set to Yes, the SMS shall be as follows:
Called number, Delay, Calling number
If the Delay in SMS content parameter is set to No, the SMS shall be as follows:
Called number, Calling number
Called number – this parameter is mandatory. Calls are routed according to the
settings. Destination for ring
Delay – this parameter is optional and has the same function as CallBack delay
, yet a higher priority.
Calling number – this parameter is optional and identifies the calling party if
necessary. If absent, the SMS sender is used as the calling party.