2N NetStar Admin manual - Manual (Page 222)

222
Profiles
In this tag, define the properties of a extension within a selected user profile. The
extension profile is the highest priority setting. You cannot create new profiles but can
edit the existing ones. A list of the profiles created on the user level is displayed on the
left. When you select one of these profiles, you will see two new tags –
and Basic
. Find the following parameters in the tag of the extension profile: Properties Basic
Active – use this option to activate an extension within a selected user profile. If
it is not checked off, all calls coming to this extension are rejected. The extension
can establish outgoing calls.
Do not ring at call to user – use this option to enable call routing to an
extension within call routing to an extension user when the user profile is active.
If it is checked off, only the calls routed directly to this extension alert the
extension.
The Properties tag consists of a lot of subtags, which are described in a separate
chapter for convenience. This tag is exceptional because almost all of its parameters
follow the hierarchical structure. For the structure and all the parameters refer to
Chapter
. Setting Properties Remember that the extension profile level setting
has the highest priority!