2N NetStar Admin manual - Manual (Page 209)

209
Number – here fill in the user or according to the Number URI Scheme
column.
Ring pattern – choose a specific ring tone for each user phone book
record. If the PBX accepts an incoming call with a CPN matching this
record, your extension will use this ring tone.
The remaining six columns are used for forwarding incoming calls to a specific
destination. The call forwarding settings in the phone directories have the highest
priority of all within the PBX.
VoiceMail
The tag is used for configuring the user VoiceMail and is available in the VoiceMail
menu. The tag occurs in two forms depending on the level Users – Users and Groups
to be configured.
VoiceMail for Groups
If you select one of the user groups in this tag, you can change only some parameters.
The settings on this level have a lower priority than those on the subgroup or user
level.
Progress – use this option to choose a VoiceMail progress tone from a list.
Message – use this parameter to set the text of the SMS informing of a new
VoiceMail message. In addition to a static text, you can use dynamic strings with
the following meanings:
%u – called user name;
%n – calling user name;
%c – calling user number;
%d – VoiceMail creation date and time.
Save to User – use this parameter to enable/disable saving messages at the
user regardless of the user settings, or respecting the user settings
. The selection
is intended for displaying messages on Cornets and in . 2N NetStar Assistant
®
SIP extensions – use this parameter to enable/disable resending messages to
user SIP stations regardless of the user settings, or respecting the user settings
(According to stations).
Email extensions – use this parameter to enable/disable resending messages to
user email stations regardless of the user settings, or respecting the user settings
(According to stations).
Mobility Extensions – use this parameter to enable/disable resending
messages to user external stations regardless of the user settings, or respecting
the user settings (According to stations).
VoiceMail for Users
If you select one of the users, you can set more parameters than on the group level.
The meanings of the parameters are as follows:
Enabled – use this option to enable VoiceMail function for a selected user. It is
subject to licence and after saving the setup you have to check whether the
option is ticked off. If not, then you do not have enough licences for Licensed
this function.