2N NetStar Admin manual - Manual (Page 195)

195
Status Control Objects
A Status Control object is a routing object used for keeping the defined state
(information) on the basis of received information. Received information here means
the called number or text message. The state of the Status Control object is
determined by the called number or received SMS. Use the Routing – Routing
menu to create the Status Control objects. The objects – Status Control objects
Status Control parameters are an inseparable part of the Status Control objects and
help define their states. Refer to the
men Global data – Status Control parameters
u for the Status Control parameter settings.
You can also be informed of a change of the selected Status Control object state by the
Event Reporter, which can notify transition to the Error or OK state if programmed so.
Figure: Pohled na menu pro nastavení routovacího objektu Status Control
Name – this parameter gives the name of the selected routing object and cannot
be configured.
Actual state – informs about the current Status Control object state.
Previous state – gives information on the previous Status Control object state.
This parameter is used for information only and cannot be edited.
Default state – this parameter defines the state to which the Status Control
object passes after the timeout. This option is only available if the Default state
is non-zero. timeout
Default state timeout – here set the period of time after which the default
state is set automatically. Select '0' to disable the automatic state change
function.
Assistant – use this block of parameters to set the bundle with respect to the
Assistant user application.
Visible in Assistant – use this option to display a bundle within the
application. If it is not checked, the bundle is not available for use.
Group – use this option to select a group or subgroup of users who are
allowed to work with a selected bundle within the application. If the
selected group (or subgroup) contains subgroups, the bundle is available