Connection of configuration tool to netstar, Time – 2N NetStar Admin manual User Manual

Page 265

Text mode
Original mode

265

Time

When you are in the initial screen for time configuration, press 1 and 3. You will get
into the

menu. For correct configuration, push 3 to set the time zone and

Time setting

then enter the number according to your location. Then you can modify time and date
using options 1 and 2.

You can also use an NTP server is available on the LAN. After pressing option 4 set the
IP address or domain name of the NTP server (one DNS at least has to be set in the IP
settings).

Connection of Configuration Tool to NetStar

Start the NetStar configuration tool. In case no connection to NetStar has been
created, create a new one.

Create a new group for the customer by choosing the Folder icon and the On the

option and name the new group. In our case it is called

same level

Test

Once a new group is created, right click on it and go to the Create PBX – To group