2N NetStar Admin manual - Manual (Page 163)

163
Bundles
Bundle
The bundle is a routing object that enables to route an incoming call to one (or all) of
the objects specified in the bundle. Choosing an object within a bundle depends on the
selected strategy. The fact that an routing object is busy need not necessarily lead to
routing termination. The call can be routed to another routing object either upon a
busy router recognition or after a timeout as preset. For bundle parameters and their
usage see below.
Bundle Setting
Bundles can be configured in the menu. A list Routing – Routing objects – Bundles
of available bundles is displayed on the left. Add, delete or rename bundles using the
context menu. You can also create predefined bundles with the Default option. The
parameters of the selected bundle are shown on the right. The figure below shows a
possible bundle configuration.
Figure: View of Bundle Configuration Menu – Basic
The above mentioned menu consists of the following parameters:
Allocation strategy – here select the way of object choosing within a selected
bundle. Choose
, , or . Linear Cyclic All By credit
Linear strategy – an incoming call is always routed to the first bundle
row. If this object is busy or unavailable, the call is routed to the next row
or terminated (as preset).
Cyclic strategy – an incoming call is routed to the bundle row that comes
immediately after the one used for the previous routing to this bundle. If