2N NetStar Admin manual - Manual (Page 201)

201
Figure: View of Identification Table Basic Settings
Strategy – use this option to define the way of handling records from multiple
users calling one number. This strategy refers both to record storing and
subsequent record retrieving. Choose one of the following three strategies:
All – choose this option to save all records to the database. If an incoming
call matches more AutoClip router records, all the matching users are
alerted at the same time.
Sequentially – choose this option to alert all the matching users
sequentially (starting from the latest record) if an incoming call matches
more AutoClip router records. The next record is used for the next
matching incoming call only if the previous record was marked as used and
not deleted, the timeout validity was restarted or no action was made after
the record use.
Last one – choose this option to add the latest record to the matching user
(deleting the earlier ones) if calls are made or SMS sent by multiple users
and routed through the carrier to which the Last one AutoClip router is
assigned. If an incoming call matches more AutoClip router records (e.g.
after a router strategy change), the user matching the newest record is
only alerted.
Check port – use this option to define whether or not to check the used ports. If
this option is enabled, it is checked whether the incoming call came to the PBX
through the same port as had been used for the outgoing call making the record.
If not, the AutoClip router record will not be used.
Default destination – in this field set the default destination to be used for
incoming call routing in case no AutoClip router record match is found.
Destination for address – use this section to define the destination to be used
for incoming call routing in case there is no user but only the CLI information in
the
column. Final destination
Figure: View of Identification Table Call Routing Settings
AutoClip Record Table
The AutoClip router table consists of eleven columns with the following meanings:
Validity – this column displays the validity time for each record. Set the time