2N NetStar Admin manual - Manual (Page 136)

136
Cause Objects
In this menu, you can create sets of causes to be used for modifying bundle
parameters. The menu is divided into two parts. You can add, remove and rename
objects on the left and edit the selected objects on the right. The following options are
available on the right-hand side:
Name – name of the selected cause object.
Respond to – use this parameter to specify the object's behaviour with respect
to the causes entered.
Unspecified – the object shall respond to all causes unspecified in the
Cause item.
Specified – the object shall only respond to the causes specified in the
Cause item.
Cause – define causes by selecting any of the pre-defined ones. In addition to
common causes, you can use specific PBX causes or user causes defined in the
menu. See below for some specific Global data – Causes – User causes
causes. The following options are available under the right-hand mouse button:
Add – add a row.
Remove – remove the selected row.
Remove all – remove all rows all at once.
Specific causes
Invalid licence – the cause warns that the licence is invalid.
Low credit – the cause warns that the virtual port credit has been
exhausted.
Recording not ready – the cause notifies a call recording error due to
inaccessibility or unavailability of the storages mapped, for example.