2N NetStar Admin manual - Manual (Page 114)

114
6.6 Services
Service Division
The services supported by the NetStar PBX can be divided into three groups – , User
and . Extension Others
User – this group consists of user call forwarding settings, including forwarding
to VoiceMail, VoiceMail progress tone/message recording, playing and deleting,
PIN changing, user bundle login and so on.
Extension – this group consists of extension forwarding settings, extension
ringing settings for user calls, extension bundle and carrier logins, private calls,
CallBack to a extension, call takeover from a extension and so on.
Others – this group consists of all the remaining services – progress tones
recording, PBX date and time setting, CallBack to a number, global setup, call
assumption from a group, conference calls, connection to calls, profile activation
and so on.
Service Setting
The menu displays a list of available services on the let. To Global data – Services
create the default list use the option in the context menu. Set the selected Default
service on the right–hand side of the menu. Programmable service attributes are added
to each service such as progress tones, setting status messages, PIN activation, alert
time and default routing destination. If a service requires the PIN, assign the PIN to the
calling user to avoid service unavailability!
To activate a service, dial the service prefix into the routing table according to the
called number. For the default service router refer to the
in the Services Routing –
menu as shown below: Routers
Figure: View of Service Call Routing Menu
Or, activate a service by sending an SMS. This method can only be used for groups of
services that need not be active during extension setting (e.g. call forwarding, PIN/user